74 TX9165-UM-EN-07
On Delay - Off Delay
The
Activation On
of the setpoint can be
delayed by an adjustable time period (
t On
).
The
Activation Off
of the setpoint can also
be delayed by an adjustable time period
(
t Off
).
4.5.3 Assign Fault
Each input channel
E
to
H
has a
Fault
alarm
output state.
• Analogue input signal over range
• Analogue input signal under range
• Module fault
To Access Assign Fault
From the
Sentro rModule Setup Menu
, use
the navigation keypad, scroll to
Assign Fault
and select
OK
.
If a
Security Code
has been enabled you will
be prompted to enter it, enter the
Security
Code
and select
OK
.
Assign to
The
Fault
state can be assigned to the
following:
• Relay 1 output
• Relay 2 output
• Relay 3 output
• Relay 4 output
• The on-board audio/visual alarm
www.trolex.com
