manualshive.com logo in svg

Trolex Sentro 8, User Manual

Share
Download
Trolex Sentro 8 User Manual Download Page 99

TX9165 User Manual

            TX9165-UM-EN-07          99

4.  Compare the time with the table in 

Section 8.3.

5.  If batteries fail to achieve the required 

time they should be replaced.

6.  Contact Trolex or your local Trolex service 

agent to arrange for your batteries to be 

replaced: 

[email protected]

7.  After the completion of all maintenance, 

update the maintenance records.

8.8.3   Battery Back-up Cells 
 

   - Replace

Trolex recommends that the Battery Back-up 

Cells - Replace is carried out every 3 years.
1.  Contact Trolex or your local Trolex service 

agent to arrange for your cells to be 

replaced: 

[email protected]

2.  After the completion of all maintenance, 

update the maintenance records.

8.9 Repairs

Should your Sentro 8 and battery back-up 

become damaged and need repair, contact 

Trolex or your local Trolex service agent to 

arrange for your Sentro 8 Battery Back-up to 

be repaired: 

[email protected]

After the completion of all maintenance, 

update the maintenance records.

www.trolex.com

Summary of Contents for Sentro 8









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands