78 TX9165-UM-EN-07
4.6 Output Relays Setup
The Sentro 8 Sensorstation is equipped with
four integral output relays for external alarm
and control purposes.
Initiating control commands can be assigned
to any of the four relays:
• From
Setpoint 1
(
SP1
) (
General
alarm)
on modules
A
to
H
• From
Setpoint 2
(
SP2
) (
High
alarm)
on modules
A
to
H
• From a
Fault
on modules
A
to
H
• From other relays fault monitoring
• From the
A/V Alarm
fault monitoring
The response characteristics of each of the
relays can be setup according to functional
requirements.
Checkpoint
The LED relay indicator is on when the
relay is powered-down (Alarm State).
4.6.1 Mode
Each relay can be independently setup to
respond in three different ways.
Auto Reset
The output relay will power-down when the
Setpoint Command
is activated
On
and
power-up when the
Setpoint Command
is
activated
Off
.
www.trolex.com
