Trojan TOUR 370, Instruction And Assembly Manual

Page: 12 / 26

10267 - 12
2.0 F 2.9 means GOOD
3.0 F 3.9 means FAIR
4.0 F 5.9 means BELOW AVERAGE
6.0 means POOR
Note:
If there is no pulse signal input then the computer will show “P” on the PULSE window. If the computer shows
“ERR” on the message window, please re-press the PULSE RECOVERY key and please make sure your hands are
firmly on the grips.
Key function:
There are 6 button keys and the function description are as follows:
1. START/STOP key:
a. Quick Start function: Allows you to start the computer without selecting a program.
Manual workout only. Time automatically begins to count up from zero.
b. During the exercise mode, press the key to STOP exercise.
c. During the stop mode, press the key to START exercise.
2. UP key: a. Press the key to increase the resistance during exercise mode.
b. During the setting mode, press the key to increase the value of Time, Distance, Calories,
Age and select Gender and Program.
3. DOWN key: a. Press the key to decrease the resistance during exercise mode.
b. During the setting mode, press the key to decrease the value of Time, Distance, Calories,
Age and select Gender and Program.
4. ENTER key: a. In the setting mode, press the key to accept the current data entry.
b. In the stop mode, by holding this key for over two seconds the user can reset all values to
zero or default value.
c. In setting the Clock, press this key to accept the setting hour and minute.
5. BODY FAT key: Press the key to input your HEIGHT, WEIGHT, GENDER and AGE then to measure your
body fat ratio.
6. PULSE RECOVERY key: Press the key to activate heart rate recovery function.
Program Introduction & Operation:
Manual Program: Manual
P1 is a manual program. User can start exercise by pressing START/STOP key. The default resistance level is 5. Users may
exercise in any desired resistance level (adjusting using the UP/DOWN keys during the workout), any period of time, any
number of calories or any distance.
Operations:
1. Use UP/DOWN keys to select the MANUAL (P1) program.
2. Press the ENTER key to enter MANUAL program.
3. The TIME will flash and you can press UP or DOWN keys to set your exercise TIME. Press ENTER key to
confirm your desired TIME.
4. The DISTANCE will flash and you can press UP or DOWN keys to set your target DISTANCE. Press
ENTER key to confirm your desired DISTANCE.
5. The CALORIES will flash and you can press UP or DOWN keys to set your exercise CALORIES. Press
ENTER key to confirm your desired CALORIES.
6. The PULSE will flash and then you can press UP or DOWN keys to set your exercise PULSE. Press ENTER key to
confirm your desired Pulse.
7. Press the START/STOP key to begin exercise.
5. COMPUTER FUNCTIONS (CONT.)