769-9
ASSEMBLY STEPS (CAGE)
STEP 03
• Thread eye of the Upper Cable (43) through pulley housing on Back Top Cross Frame (10).
• Install Pulley (31) into pulley housing using (14.5mm) Bushing (52), (3/8” x 2-5/8”) Hex Bolts (46), (3/8”) Washers (56)
and (3/8”) Locknuts(55).
• Install a pulley into the bracket on the Back Top Cross Frame (10) using (3/8” x l-3/4”) Hex Bolts (46), (3/8”) Washers
(56) and (3/8”) Locknuts(55).
• Attach the eye of Upper Cable (43) to Weight Plate Sleeve (23) with Chain Hook (38).
• Hang Pulley (31) on the Upper Cable (43), install this pulley into Double Pulley Bracket (25) using (3/8” x l-3/4”) Hex
Bolts (46), (3/8”) Washers (56) and (3/8”) Locknuts(55).
• Push PVC Hand Grip (36) onto Lat Bar (20), attach Lat Bar (20) to end of Upper Cable (43) using Chain Hook (38).