769-11
ASSEMBLY STEPS (CAGE)
STEP 05
• Thread Lower Cable (41) through bottom pulley housing of Center Vertical Frame (8) and the other back pulley house
as shown.
• Install Pulley (31) into pulley housing using (3/8” x 25/8”) Hex Bolt (48), (14.5mm) Bushing (52), (3/8”) Washer (56)
and (3/8”) Lock Nut (55).
• Make sure Cable is in the groove of pulley.
• Install Pulley into the bracket of the Back Base Frame (3) and into Double Pulley Bracket (25) using (3/8” x l-3/4”) Hex
Bolt (49), (3/8”) Washer (56) and (3/8”) Lock Nut (55) make sure Cable is in the groove of pulley as shown.
• Attach eye of Cable to Float Pulley Bracket (24) using Chain Hook (38) and Chain (40)
• Push Pvc Hand Grip (36) onto Curl Bar (19). Attach Curl Bar (19) to the other end of Cable with Chain Hook (38)
and Chain (40).
• If you want to load weight plates, you can use (l”) Quick Clip (39) to secure the weights.
• Put Barbell (61) onto Big Barbell Crutch Assembly (16) or Little Barbell Catch Assembly (14).
