Trojan IRON MAN 500, Care Instructions And Assembly Manual

Page: 6 / 28

$
E
E
1562-6
4. ASSEMBLY STEPS
Two persons are required to finish the assembly steps.
(Caution!! Please follow the assembly steps below to avoid injury).
STEP 1
• After pulling out Control Wire with Guide Thread in
right Upright (D), clip it into the inside hole in right
Upright (D).
• Tighten left and right Uprights (C, D) with Allen Bolt (a)
after they are inserted into their stands
Note:
The picture in the circle means the machine is equipped
with remote controller, but no TV function.
CAUTION:
Ensure that cables are not damaged during assembly or
when tightening screws.
STEP 2
• Connect Upper and Lower Control Wire on Right
Upright (D)
• Thread wires into Upright (C,D) and place Computer
Console(A) on the Frame.
• Attach with Allen Bolt (b).
CAUTION:
Ensure that cables are not damaged during assembly or
when tightening screws.