LASER ENGRAVING&CUTTING CONTROLLER AWC608
、
27
3 typical groups of [Wok control parameters] for users
‘
reference
：
3.3.3.2 System config parameters (refer to View 3-3-3)
【
XY Home Speed
】
: Speed for machines’ returning to origin, normally is set at between 40~80.Too
big setting may leading to big impact onto the limit switch which could break the
switch.
【
Z Home Speed
】
: Speed of Z-Axis (Elevating axes) returning to origin
【
U Home Speed
】
: Speed of U-Axis (Feeding axes) returning to origin
【
Z Work Speed
】
: Speed of Z-Axis movement during work
【
U Work Speed
】
: Speed of U-Axis movement during work
【
Key Move Speed
】
:Speed of keys’ movement on LCD Panel
【
Run box Speed
】
: Speed of moving along the image outline.
【
Clip box Speed
】
: Speed of cutting image outline.
3.3.3.3 User parameters import and export (Refer to View 3-3-3)
Filename extensions for parameter files is cf5
。
User parameter import: allows import User’s complete setting parameter files.
Click [Import] and then import user parameter.
User parameter export: allows copy the current parameter settings. Click [Export] and then export
current parameter. Moreover the exported parameter can be used to modify the current main board
parameter through AWC608 main board U disk port.
