LASER ENGRAVING&CUTTING CONTROLLER AWC608
、
5
laser head.
¾
Multiple functions of
Path Optimization and pause function during working.
¾
Multiple saving modes of image and working parameter, and can be recycle.
¾
Function of estimating working time and cost budget, intelligent input
.
¾
Array input, immediately output and go back to origin to output orientation mode
.
¾
Unique double laser systems working intermittently, working independently and motion trial
with function of offset and control
¾
Set the working start point, working path, dock position of laser head according to different
requirement.
¾
Be compatible with multiple communication modes. User can use USB communication and
network communication according to situation.
¾
Support CorelDraw direct output version, AutoCAD direct output version.
¾
Perfect continue to engraving function after outage; main board record working mode and
position of laser head in time, after outage, restart machine, machine can continue unfinished
work.
¾
Support 4 axes: X, Y, Z, U, Z-axis is used for elevating and U-axis is used for feeding.
¾
Autofocus, no need to adjust the focal distance between laser head and object, convenient to
new user.
¾
Engrave photograph directly, support rotating engraving, protect various communications, with
two limit ways: software limit and hardware limit
¾
Support slope engraving, main board online upgrade, all capacity and branded U disk.
1.5 Operating System Environment Requirement
⑴
Run on Windows( Window2000
、
Window XP
、
Vista
、
Win7 ) system
⑵
Celeron 2.1G above
⑶
Suggest using 1G above memory.
Chapter 2 Installation
2.1 Installation Steps
Access to installation directory:
Double click Setup.exe:
Click
【
Install/
安装】
:
