LASER ENGRAVING&CUTTING CONTROLLER AWC608
、
73
【
Key origin
】：
Take the original point selected by
of LCD panel as beginning.
【
Soft origin
】：
System will work according to the position of data on coordinate of software.
【
Machine zero
】：
Take zero point of machine (limit point) as beginning.
Press
or
to move cursor onto one item, then press
to set specific orientation
mode
7.4.5 Control Mode
(refer to view 7-4)
Under the main menu interface, press
or
or
or
to move cursor onto item
【
control
mode
】
, press
to enter into
【
control mode
】
interface:
【
Soft layer params
】：
Using the layer parameter set in software ( LaserCAD) to deal with
graphic and data. (Including: speed, maximum power and minimum power of laser 1, maximum
power and minimum power of laser 2)(Regarding the instruction of layer parameter, please
refer to 4.3layer parameter)
【
LCD Panel params
】：
Using the parameter set in the main interface of LCD panel to deal with
graphic and data. (Including: speed, maximum power and minimum power of laser 1, maximum
power and minimum power of laser 2)(Regarding the instruction to the main interface of LCD
Panel, please refer to
7.3 function instruction of main interface.
)
