LASER ENGRAVING&CUTTING CONTROLLER AWC608
、
28
3.3.3.4 User parameters read and save (Refer to View 3-3-3)
Filename extensions for parameter files is cf5
。
User Parameter reading, namely, read and input the saved control panel parameter into the
software interface. Click [Read]
User Parameter saving, namely, save the software interface settings into control panel RAM, and
give control panel correct settings. Click [Save]
If not click [Save] after parameter settings, the settings will not be effective.
3.3.4 Advanced Function
View 3-3-4
3.3.4.1Rotate Engrave (Refer to
View
3-3-4)
【
Enable Rotate Engrave
】
: Slecleted, will make the outputting data of common engraving to be
automatically shifted to rotate engrave data, so as to realize the function of
rotating engraving..
【
Rotate axis con(um)
】
:When set X-Axis is rotation axis, engraving method must be [one-way
vertical] or [two-way vertical],set Rotate axis con to be value of X axes
pulse unit. When set axes Y to be rotation axes, engraving method must
be [one-way Horizontal] or [two-way Horizontal], set Rotate axis con to be
value of Y axes pulse unit.
【
Step per rotate (pulse)
】
: Pulse numbers required from motor driver when rotation axes makes 1
cycle
【
Current diameter
】：
Diameter of engraving objects.
Parameter settings for rotate engraving as below:
