Trivel E-Azteca, User Manual

Page: 32 / 72

P. 32 — User manual V3
Getting started
Step 1: Charge the battery
1.
Connect the AC power plug into the charger.
2.
Plug the AC power cord into an electrical outlet. The LED
indicators on the charger will light up: Power red – Charge
green. Connect the charging plug into the battery’s left side
charging port. The LED charge indicator on the charger will
turn red confirming that charging is underway. Let the battery
charge until it is full.
3.
The light on the charger will turn green when fully charged.
4.
Pull the charging plug from the battery port and replace the
rubber protector cap.
Step 2: Adjust your position
1.
Slide the seat post backwards or forwards into the frame to set
proper leg extension. See section Setting your seat position
for instructions.
2.
Move the backrest support up or down along the rail and adjust
the angle to your preference. See section Setting the backrest
height and angle for instructions.
3.
Raise or lower the upper stem assembly to find a comfortable
handlebar height.
4.
Make sure all the tightening levers and bolts are tight.