P. 56 — User manual V3
Check the front derailleur alignment*
(Not applicable on 9-speed model)
Use the right-hand side shifter to put the
chain on the lowest rear gear (biggest
sprocket on the freewheel).
Use the left-hand side shifter to put the
chain on the middle front gear.
Rotating the pedals to get the chain
moving is necessary for the gear change
to take effect.
Chain should be on the middle gear in the
front and largest gear in the back
View from above the front derailleur cage
Check that the front derailleur cage’s inside
plate is as close as possible to the chain
without touching it. Recommended distance
is 0.5 to 1 mm (as shown below). If there is
too much of a gap, it must be corrected by
adjusting the cable tension.
Summary of Contents for E-Azteca
