Trivel E-Azteca, User Manual

Page: 60 / 72

P. 60 — User manual V3
Adjusting a quick release locking lever
Over time or if it’s not working efficiently,
a quick release locking lever may require
adjustment. A properly adjusted quick
release lever should require significant force
to push the lever from the Open to Closed
position.
Generally, if the attached components
can slide or rotate when the lever is in the
Closed position, it means the locking lever
needs adjusting.
Check frequently for proper attachment
of components using a quick release
locking lever on your Azteca to make
sure it is mechanically sound and safe
to ride.
A poorly adjusted quick release lever can
cause the components it is supposed to
be holding together to move or detach.
This can lead to serious injuries or even
death.
Adjust a quick release lever
1.
Tighten or loosen the adjustment nut
until a significant force is required to
push the lever into the Closed position.
2.
Firmly push the lever into the Closed
position with the palm of your hand and
check the adjustment by trying to move
the attached components. Readjust if
needed.
The force required to push the lever so
that proper attachment is reached can
vary with time and from one system to
another. It is recommended that you test
the attachment of the components each
time a lever is opened and closed.