41
General Information
Tool Kit and Handbook
1. Tool kit/Handbook location (Sprint ST
shown)
The tool kit and handbook are located in a
lockable stowage box on the right hand side
of the motorcycle.
To gain access, insert the ignition key into the
lock and remove the cover.
Note:
•
The stowage box is not
waterproof.
Seat - Sprint ST
1. Seat fasteners
Two seat fasteners are located under the rear
edge of the seat. To remove the seat, push
back the rear edge of the seat and unscrew
the exposed fasteners. Remove the fasteners
and collect the two flanged washers. Raise the
seat and slide rearwards for complete
removal from the motorcycle.
To re-install the seat, engage the seat's
tongues under the fuel tank and slide the seat
forwards to engage.
Re-install the flanged washers and fasteners.
Tighten the seat fasteners to
27 lbf in (3 Nm)
.
cc
p
m
1
Warning
The muffler heat shield is located directly
below the seat and may be hot to the
touch. Do not touch the heat shield as
contact with the hot heat shield may cause
the skin to become burned.
ccxg
1
