113
Maintenance and Adjustment
Installation is the reverse of the removal
procedure.
Position Lamp Bulb Replacement
The position lamps are installed within the
headlight aperture.
Carefully remove the rubber bulb holder
from the back of the position lamp and
detach the bulb.
Installation is the reverse of the removal
procedure.
Brake/tail Light
The brake/tail light unit is a sealed,
maintenance free LED unit.
Warning
The bulbs become hot during use. Always
allow sufficient time for the bulbs to cool
before handling. Avoid touching the glass
part of the bulb. If the glass is touched or
gets dirty, clean with alcohol before re-use.
Caution
Ensure that the bulb holder is correctly
installed to prevent water ingress.
Warning
When reconnecting the battery, connect
the positive (red) lead first.
Warning
Do not reconnect the battery until the
assembly process has been completed.
Premature battery reconnection could
result in ignition of the battery gases
causing risk of injury.
Warning
Riding the motorcycle with defective brake
lights is illegal and dangerous. In the event
of failure of the LED unit, consult your
authorized Triumph dealer.
An accident causing injury to the rider and
other road users may result from use of a
motorcycle with defective brake lights.
