22
General Information
To reset either of the trip meters,
select and display the trip meter to be
zeroed then turn the reset knob anti-
clockwise (as viewed from the left
side of the motorcycle) and hold it in
the forward position for 2 seconds.
After 2 seconds, the trip meter on
display will reset to zero.
Warning Lights
Low Oil Pressure
Warning
With the engine running, if
the engine oil pressure becomes
dangerously low, the high coolant
temperature/low oil pressure warning
light will illuminate and an arrow will
appear on the digital display pointing
to the low oil pressure warning
symbol.
NOTE
• The high coolant temperature
/low oil pressure warning
light will illuminate and an
arrow will appear on the
digital display along side the
low oil pressure warning
symbol, if the ignition is
switched on without running
the engine.
Coolant Temperature
If the coolant temperature
becomes too high, the high
coolant temperature/low oil pressure
warning light will illuminate and an
arrow will appear on the digital
display pointing to the high coolant
temperature symbol.
Engine Management
System Malfunction
Indicator Light
The malfunction indicator light for the
engine
management
system
illuminates when the ignition is
switched on (to indicate that it is
working) but should not become
Caution
Stop the engine immediately if the
low oil pressure warning light
illuminates. Do not restart the
engine until the fault has been
rectified.
Severe engine damage will result
from running the engine when the
low oil pressure warning light is
illuminated.
Caution
Do not continue to run the engine if
the high coolant temperature
warning is illuminated as severe
engine damage may result.
www.ClassicCycles.org
