23
General Information
illuminated when the engine is
running.
If the malfunction indicator light
becomes illuminated when the
engine is running, this indicates that
a fault has occurred in one or more of
the systems controlled by the engine
management system. In such
circumstances,
the
engine
management system will switch to
`limp-home' mode so that the journey
may be completed, if the fault is not
so severe that the engine will not run.
Turn Indicators
When the indicator switch is
turned to left or right, the turn
indicator light will flash on and off at
the same speed as the turn
indicators.
High Beam
When
the
ignition
is
switched
on
and
the
headlight dip switch is set to ’high
beam', the high beam warning light
will illuminate.
Neutral
The neutral warning light
indicates
when
the
transmission is in neutral (no gear
selected). The warning light will
illuminate when the transmission is in
neutral with the ignition switch in the
’ON' position.
Low Fuel
The low fuel indicator will
illuminate when there are
approximately 7.0 litres of fuel
remaining in the tank.
Alarm
The alarm light will illuminate
when
the
conditions
described in the accessory alarm
instructions are met.
Warning
Reduce speed and do not continue
to ride for longer than is necessary
with the malfunction indicator light
illuminated. The fault may
adversely
affect
engine
performance, exhaust emissions
and fuel consumption. Reduced
engine performance could cause a
dangerous riding condition, leading
to loss of control and an accident.
Contact an authorised Triumph
dealer as soon as possible to have
the fault checked and rectified.
Classic Cycles Technical Resources
