24
General Information
Ignition Key
1 Steering lock
2 Off position
3 On position
4 Lock position
5 Park position
In addition to operating the steering
lock/ignition switch, the ignition key is
required to operate the seat lock and
fuel tank cap.
When the motorcycle is delivered
from the factory, two keys are
supplied together with a small tag
bearing the key number. Make a
note of the key number and store the
spare key and key number tag in a
safe place away from the motorcycle.
Your authorised Triumph dealer can
supply a replacement key cut from
details of the key number or can cut a
new key using the original as a
master.
Ignition Switch/Steering
Lock
Ignition Switch Positions
This is a four position, key operated
switch. The key can be removed
from the switch only when it is in the
OFF, LOCK or P (PARK) position.
TO LOCK: Turn the key to the ’OFF'
position, push and fully release the
key, then rotate it to the ’LOCK'
position.
’PARKING': Turn the key from the
’LOCK' position to the `P' position.
The steering will remain locked.
NOTE
• Do not leave the steering lock
in the ’P' position for long
periods of time as this will
cause
the
battery
to
discharge.
Caution
Do not store the spare key with the
motorcycle as this will reduce all
aspects of security.
www.ClassicCycles.org
