background image

4 5

Enter the call number of your correspondent by using a full number.

Note:

Please note that Cost Centre Codes are not currently available with residential 132 Service.

RESETTING MERCURY DIAL MEMORY:

If you wish to change your Mercury code to a new one or if you need to send your machine away for repair, you must reset
the Mercury dial memory using the following procedure:

Press MENU key followed by 1, 3 and OK.

Move the cursor   using the   and   keys and select the MERCURY record, then press OK.

Press OK to acceed to the Mercury PIN Codes Service number.
Press 

 key to erase the Mercury PIN Codes Service number:

Press MERCURY key (SHIFT and OK keys at the same time) and enter a new Mercury Code, if any.
Press OK to validate the MERCURY PIN code.
Press FAX/COPY to validate the MERCURY record, then press STOP key.

RETURNING TO RESIDENTIAL 132 SERVICES:

Press MENU key followed by 1, 3 and OK.

Move the cursor   using the   and   keys and select the MERCURY record, then press OK.

Press OK to acceed to the Mercury PIN Codes Service number.
Press 

 key to erase the PIN Code number and then press 2 instead of 1.

Press the OK key to validate the MERCURY number.

Press FAX/COPY to validate the MERCURY record, then press STOP key.

CH10-11 23228395-7 A.P65

10/08/2000, 07:44

45

Summary of Contents for FAX 930



























































Reviews: