Triton TSPS370, Operating/Safety Instructions Manual

Page: 6 / 84

6
EN
Original Instructions
Technical Abbreviations Key
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Caution!
For indoors use only!
Toxic fumes or gases!
Always disconnect from the power supply when adjusting, changing accessories,
cleaning, carrying out maintenance and when not in use!
Dust extraction required or recommended
Class I construction (protective earth)
Environmental Protection
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or retailer
for recycling advice.
Conforms to relevant legislation and safety standards.
Description of Symbols
The rating plate on your tool may show symbols. These represent important information about
the product or instructions on its use.
Specification
Model no: TSPS370
Voltage: 230V~, 50Hz, 350W
No load speed: 1425/min
Spindle oscillations: 24opm
Stroke length:
19mm
Sleeve length: 142mm
Sleeve diameters: 14mm, 21mm, 28mm, 40mm, 51mm
Tilting table :
0-45°
Dust port: External 52mm, Internal 47mm
Table size: Ø380mm
Ingress protection:
IP20
Protection class:
Dimensions (L x W x H): 380 x 380 x 480mm
Weight: 14 kg
As part of our ongoing product development, specifications of Triton products may
alter without notice.
Sound and vibration information:
Sound Pressure L
PA
: 82.7dB(A)
Sound Power L
WA
: 95.7dB(A)
Uncertainty K:
3dB
The sound intensity level for the operator may exceed 85dB(A) and sound protection
measures are necessary.
WARNING : Always wear ear protection where the sound level exceeds 85dB(A) and limit the
time of exposure if necessary. If sound levels are uncomfortable, even with ear protection, stop
using the tool immediately and check the ear protection is correctly fitted and provides the
correct level of sound attenuation for the level of sound produced by your tool.
WARNING : User exposure to tool vibration can result in loss of sense of touch, numbness,
tingling and reduced ability to grip. Long-term exposure can lead to a chronic condition. If
necessary, limit the length of time exposed to vibration and use anti-vibration gloves. Do not
operate the tool with hands below a normal comfortable temperature, as vibration will have a
greater effect. Use the figures provided in the specification relating to vibration to calculate the
duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according to international
standards. The figures represent normal use for the tool in normal working conditions. A poorly
maintained, incorrectly assembled, or misused tool, may produce increased levels of noise
and vibration.
www.osha.europa.eu provides information on sound and vibration levels in the
workplace that may be useful to domestic users who use tools for long periods of time.
Thank you for purchasing this Triton tool. This manual contains information necessary
for safe and effective operation of this product. This product has unique features and,
even if you are familiar with similar products, it is necessary to read this manual
carefully to ensure you fully understand the instructions. Ensure all users of the tool
read and fully understand this manual.
Introduction
V Volts
~, AC Alternating current
A, mA Ampere, milli-Amp
n0 No load speed
n Rated speed
opm Orbits or oscillations
per minute
spm Strokes per minute
° Degrees
Ø Diameter
Hz Hertz
, DC Direct current
W, kW Watt, kilowatt
/min or
min
-1
Operations per minute
rpm Revolutions per minute
dB(A) Decibel sound level (A
weighted)
m/s
2
Metres per second
squared (vibration
magnitude)
622768_Manual.indd 6 18/02/2019 08:52