Model SMM 770 Scanning Magnetic Microscope System
TRISTAN TECHNOLOGIES --Page
48
Orientation Standard
<end miscvar>
<start header>
X position [mm]
Y position [mm]
Z position [mm]
Ch1_Amplitude [T]
Ch1_Phase
[deg]
<end header>
<start databody>
-50.000 -50.000 0.000 1.11680E-7
0.0
-40.000 -50.000 0.000 1.05115E-7
0.0
-30.000 -50.000 0.000 1.11305E-7
0.0
-20.000 -50.000 0.000 1.15239E-7
0.0
-10.000 -50.000 0.000 1.17729E-7
0.0
0.000 -50.000
0.000 1.18715E-7 0.0
10.000 -50.000 0.000 1.16748E-7
0.0
20.000 -50.000 0.000 1.13808E-7
0.0
30.000 -50.000 0.000 1.11195E-7
0.0
40.000 -50.000 0.000 1.10079E-7
0.0
50.000 -50.000 0.000 1.13069E-7
0.0
50.000 -40.000 0.000 1.09179E-7
0.0
40.000 -40.000 0.000 1.08981E-7
0.0
30.000 -40.000 0.000 1.09549E-7
0.0
20.000 -40.000 0.000 1.10870E-7
0.0
10.000 -40.000 0.000 1.11470E-7
0.0
0.000 -40.000
0.000 1.14418E-7 0.0
-10.000 -40.000 0.000 1.16637E-7
0.0
-20.000 -40.000 0.000 1.16594E-7
0.0
-30.000 -40.000 0.000 1.12890E-7
0.0
-40.000 -40.000 0.000 1.10677E-7
0.0
-50.000 -40.000 0.000 1.09514E-7
0.0
-50.000 -30.000 0.000 1.06294E-7
0.0
-40.000 -30.000 0.000 1.09226E-7
0.0
-30.000 -30.000 0.000 1.12193E-7
0.0
-20.000 -30.000 0.000 1.13648E-7
0.0
-10.000 -30.000 0.000 1.12666E-7
0.0
etc.
Figure 4-18
Example data file
Stored *.txt (discrete SloScan data) data files can be retrieved as either a Sample or a
Reference, and displayed using the selector under the Surface tab. If the user wishes to
display Sample versus Reference, the two files must have identical tracks. Stored *.quk
(continuous QuikScan data) files can not be retrieved for display.
Data files can be deleted by pressing the
Delete
button. This will pop-up a panel for editing
the data files, as shown below: