Model SMM 770 Scanning Magnetic Microscope System
TRISTAN TECHNOLOGIES --Page
41
Figure 4-11:
View of scan track
After the track has completed, the track count will decrement, and another track
performed, until the track count reaches zero. Data at each track point is averaged. If the
track count is set to -1, the track is repeated endlessly.
Pressing the
QuikScan
button will perform a continuous scan of the sample approximately
along the defined track. This will be performed only once.
As scanning proceeds, the data will be plotted as a stripchart under the
Mag & Phase
tab,
and plotted in the 3D graph on the right, as shown below: