5
5. Enclosure Configuration
5.1 Door Locks
5.2 Cable Access and Management
The front door and the top panel door both have locks that are accessible by the included keys. The
front door latch can also be locked with a user-supplied padlock for extra security.
The top and bottom panels of the enclosure both have circular cable access ports for convenient
cable management. The top has three 1.75” ports and two 1” ports, while the bottom has three
1” ports and two 1.75” ports.
Before installation, be sure to plan the location and arrangement of components within the enclosure. Be sure all mounting rails are reversed or
adjusted for depth, depending on your equipment configuration.
5.3 Reversing the Front Door
In order to accommodate various rack installations, the front door can be reversed by switching the configuration of its latch, lock and hinges. To reverse the door,
simply remove the screws that secure the latch, lock and hinges to the enclosure. Move each piece to the opposite side of the enclosure, so that there are two
hinges on one side (one at the top, one at the bottom) and the latch and the lock on the other side.
Note: The unused screw holes are filled with rubber placeholders. To remove the placeholders, push them through with a screwdriver. Keep the placeholders to refill unused
screw holes.
HINGE
HINGE
HINGE
HINGE
LATCH
LATCH
LOCK
LOCK
HINGE
HINGE
HINGE
HINGE
LATCH
LATCH
LOCK
LOCK
TOP VIEW
BOTTOM VIEW
201107089-93-3126-EN.indd 5
8/3/2011 9:06:06 AM
