background image

7

7. Equipment Installation

8. Optional Patch Panel Installation

The SRWF5U comes with an integral, slide-out mounting bracket at the top of the enclosure. It can 
be used to secure a patch panel to the enclosure, and it partially slides out for easier cabling 

access. To install a patch panel on the patch panel mounting bracket, use the included mounting 
screws and washers to secure your equipment to the rack rail. Place the washers between the 
screws and the patch panel mounting bracket. 

Warning: Do not install equipment until you have stabilized the enclosure. If using sliding equipment rails, be careful when extending the 

rails. Do not extend more than one set of sliding equipment rails at one time. Avoid extending sliding equipment rails near the top of the 

enclosure.

Note: The threaded holes in the middle of each rack unit are numbered. A single rack unit includes the space occupied by the numbered hole and the holes 
directly above and below.

WARNING: Follow the instructions in your equipment documentation to ensure proper installation of your equipment.

1

 

 Locate the numbered openings in the mounting rails where you plan to install your equipment. 

Lower your equipment into the enclosure and set it down on the mounting rails, lining up the 

mounting holes on the equipment with the mounting rail’s mounting holes.

2

 

 Use the included mounting screws and washers to secure your equipment to the rack rail. Place 

the washers between the screws and the equipment mounting brackets.

Note: Your equipment may also include mounting hardware. Read the mounting instructions that 

came with your equipment before installing your equipment.

9. Specifications

Model

SRWF5U

Dimensions (H x W x D)

28.8 x 25.6 x 9.7” (732 x 651 x 247 mm)

Unit Weight

45 lb (20.4 kg)

Load Capacity*

150 lb (68.1 kg)

Mounting Depth (Adjustable)

17” to 20” (432 to 508 mm)

* Full wall-mount load capacity requires a mounting surface capable of bearing the full load.

1

2

3

4

5

1

2

3

4

5

1

2

1

2

3

4

5

1

2

3

4

5

3

3

1 Rack Unit

201107089-93-3126-EN.indd   7

8/3/2011   9:06:08 AM

Summary of Contents for SmartRack SRWF5U









Reviews: