1
5
8
3
6
10
2
9
4
7
11
12
13
1
1
29
9 – Display and Configuration
(continued)
9-3 Default Display
After the UPS system starts up and completes the self-test, the
•
LCD status screen will show the default display. The default
display includes a status message and diagram that shows the
operational status of the UPS system.
1
1
When any event occurs, you will see the sign “!” flashes. You can press “ ” to see the details. For example:
Press “ ” again to go to the next message. If there is no further message, the screen will return to the default screen.
9-3-1 Status Display
The UPS system output is off and the connected equipment loads
•
are not powered. This condition may be due to automatic UPS
shutdown or manually switching off the output circuit breaker
switch.
Possible causes:
The UPS automatically shuts down by itself.
•
Manually switch off the output circuit breaker.
•
