9
Your model and outlet may differ.
8
ESC
SETUP
Batt Age Alert
Months:36
Back Select Apply
ESC
SETUP
Audible Alarm
Enabled
Disabled
Back Select Apply
6
7
8
Basic Connection and Start-Up
6
Select UPS Battery Age Alert
Next, the UPS will prompt you to select the timing of the
BATTERY AGE ALERT.
Using the UP / DOWN
buttons, select the timing of the
battery age alert in months, then press APPLY .
7
Select Audible Alarm ENABLE / DISABLE status
Next, the UPS will prompt you to select the alarm ENABLE /
DISABLE status.
Using the UP / DOWN
buttons, select the alarm ENABLE /
DISABLE status, then press APPLY .
Note:
Disabling the alarm prevents the audible alarm from sounding during
power failures and UPS fault conditions only. The alarm will still “chirp” to
confirm operator input via the front panel LCD navigation buttons when the alarm
is set to disable.
8
Plug your equipment into the UPS
Your UPS is designed to support network, server and computer
equipment only.
9
Turn your UPS on
Press and hold the POWER button for 3 seconds and
release as the alarm begins to sound.
The UPS will then go through a series of diagnostic checks
before turning on output power. Once the UPS reports the
operating status of NORMAL / LOAD PROTECTED with the
configured POWER STRATEGY enabled, your UPS can
immediately be put into service to provide reliable protection
from a wide variety of power problems.
