ESC
SETUP
Power Strategy
Auto-Adaptive
Max Efficiency
Max Quality
Freq. Regulation
Freq. Conv. To 60Hz
Freq. Conv. To 50Hz
Back Select Apply
1
ESC
SETUP
Language
English
Back
Next
ESC
SETUP
Password Setup
0 0 0 0
Back Select Next
ESC
SETUP
Output Voltage
200 Vac
208 Vac
220 Vac
230 Vac
240 Vac
Back Select Apply
2
4
5
3
7
Basic Connection and Start-Up
1
Plug your UPS line cord into an electrical outlet
Your UPS must be connected to a dedicated circuit of sufficient
amperage.
Refer to the rating table labelled on the UPS for more details.
2
Select your Language
When your UPS is plugged in for the first time, the INPUT AC
LED will light up and the front panel LCD screen will request a
language selection.
Using the UP / DOWN buttons
, select your language
preference, then press the NEXT button.
The interface will confirm your selection and provide options to
go back (press BACK
ESC
) or to go to the next step
(press NEXT ).
Quick Start Guide - First Time UPS Power-On
3
Select your Power Strategy
Next, the UPS will prompt you to pick the desired POWER
STRATEGY.
Using the UP / DOWN
buttons, select your POWER
STRATEGY preference and press the APPLY button.
See the
Power Strategy Selection Options
and
UPS
Operating Modes
sections under the Operations section for
operating characteristics of each power strategy.
4
Select your Password
Next, the UPS will prompt you to pick the desired PASSWORD.
Using the UP / DOWN
buttons, select the first digit of
your desired password and press the NEXT button to
advance to the second digit. Repeat for digits 2 through 4.
Note:
To quickly set the password to “0 0 0 0” press the NEXT button 4 times.
5
Select UPS Output Voltage
Next, the UPS will prompt you to select the desired OUTPUT
VOLTAGE.
Using the UP / DOWN
buttons, select the UPS output
voltage, then select APPLY .
