48
(disable|enable)
interface spanning-tree cost
VALUE
This command configures the cost for the specific
port.
Cost range:
16-bit based value range 1-65535,
32-bit based value range 1-200000000.
interface no spanning-tree cost This command configures the path cost to default
for the specific port.
interface spanning-tree
port-priority <0-240>
This command configures the port priority for the
specific port.
Default: 128.
interface no spanning-tree
port-priority
This command configures the port priority to
default for the specific port.
configure interface range
gigabitethernet1/0/
PORTLISTS
This command enters the interface configure node.
if-range
spanning-tree
(disable|enable)
This command configures enables/disables the
STP function for the specific port.
if-range
spanning-tree
bpdufilter
(disable|enable)
This command configures enables/disables the
bpdufilter function for the specific port.
if-range
spanning-tree
bpduguard
(disable|enable)
This command configures enables/disables the
bpduguard function for the specific port.
if-range
spanning-tree
rootguard
(disable|enable)
This command enables/disables the BPDU Root
guard port setting for the specific port.
if-range
spanning-tree
edge-port
(disable|enable)
This command enables/disables the edge port
setting for the specific port.
if-range
spanning-tree cost
VALUE
This command configures the cost for the specific
port.
Cost range:
16-bit based value range 1-65535,
32-bit based value range 1-200000000.
if-range
no spanning-tree cost This command configures the path cost to default
for the specific port.
if-range
spanning-tree
port-priority <0-240>
This command configures the port priority for the
specific port.
Default: 128.
if-range
no spanning-tree
port-priority
This command configures the port priority to
default for the specific port.
Summary of Contents for NGI-S04C2
Page 1: ...1...
