85
6.1.3.
Web Configuration
Parameter
Description
Port
Select a port number to configure.
802.1x State
Select
Enable
to permit 802.1 x authentications on the port.
You must first enable 802.1 x authentications on the Switch
before configuring it on each port.
Admin Control
Direction
Select
Both
to drop incoming and outgoing packets on the
port when a user has not passed 802.1x port authentication.
Select
In
to drop only incoming packets on the port when a
user has not passed 802.1x port authentication.
Re-authentication
Specify if a subscriber has to periodically re-enter his or her
user name and password to stay connected to the port.
Port Control Mode
Select
Auto
to require authentication on the port.
Select
Force Authorized
to always force this port to be
authorized.
Select
Force Unauthorized
to always force this port to be
unauthorized. No packets can pass through this port.
Guest VLAN
Select
Disable
to disable Guest VLAN on the port.
Select
Enable
to enable Guest VLAN on the port.
Summary of Contents for NGI-S04C2
Page 1: ...1...