87
Reauth period
This field displays how often a client has to re-enter his or
her username and password to stay connected to the port.
Quiet period
This field displays the period of the time the client has to wait
before the next re-authentication attempt.
Supp timeout
This field displays how long the Switch will wait before
communicating with the server.
Server timeout
This field displays how long the Switch will wait before
communicating with the client.
6.2.
ACL
L2 Access control list
(
ACL
) is a list of permissions attached to an object. The list
specifies who or what is allowed to access the object and what operations are allowed to
be performed on the object.
L2 ACL function allows user to configure a few rules to reject packets from the specific
ingress ports or all ports. These rules will check the packets’ source MAC address and
destination MAC address. If packets match these rules, the system will do the actions
“deny”. “deny” means rejecting these packets.
The Action Resolution engine collects the information (action and metering results) from
the hit entries: if more than one rule matches, the actions and meter/counters are taken
from the policy associated with the matched rule with highest priority.
Default Settings
Maximum profile
: 64.
Maximum profile name length : 16.
Notice:
The ACL name should be the combination of the digit or the alphabet.
6.2.1.
CLI Configuration
Node
Command
Description
enable
show access-list
This command displays all of the access control
profiles.
configure no access-list
STRING
This command deletes an access control profile.
acl
show
This command displays the current access control
profile.
acl
action
(disable|drop|permit)
This command actives this profile.
disable – disable the profile.
drop – If packets match the profile, the packets
will be dropped.
permit – If packets match the profile, the packets
will be forwarded.
acl
action dscp remarking
<0-63>
This command actives this profile and specify that
it is for DSCP remark. And configures the new
Summary of Contents for NGI-S04C2
Page 1: ...1...
