Tripp Lite NGI-S04C2, Owner'S Manual

Page: 103 / 138

103
interface acceptable frame type
(all|tagged|untagged)
This command configures the acceptable frame
type.
all - acceptable all frame types.
tagged - acceptable tagged frame only.
untagged – acceptable untagged frame only.
interface pvid VLANID This command configures a VLAN ID for the
port default VLAN ID.
interface no pvid This command configures 1 for the port default
VLAN ID.
config interface range
gigabitethernet1/0/
PORTLISTS
This command enters the interface configure
node.
if-range pvid VLANID This command configures a VLAN ID for the
port default VLAN ID.
if-range no pvid This command configures 1 for the port default
VLAN ID.
configure vlan range STRINGS This command configures a range of VLAN’s
and Maximum allowed VLAN’s are 5.
configure no vlan range
STRINGS
This command removes a range of VLAN’s
and Maximum removable VLAN’s are 5.
vlan-range 1-4 This command will allow user to create VLAN
range maximum allowed VLAN’s are 5
vlan-range add PORTLISTS This command adds a port or a range of ports
to the vlans.
vlan-range fixed PORTLISTS This command assigns ports for permanent
member of the VLAN group.
vlan-range no fixed PORTLISTS This command removes all fixed member from
the vlans.
vlan-range tagged PORTLISTS This command assigns ports for tagged
member of the VLAN group. The ports should
be one/some of the permanent members of the
vlans.
vlan-range no tagged PORTLISTS This command removes all tagged member
from the vlans.
vlan-range untagged PORTLISTS This command assigns ports for untagged
member of the VLAN group. The ports should
be one/some of the permanent members of the
vlans.
vlan-range no untagged
PORTLISTS
This command removes all untagged member
from the vlans.
Example:

L2SWITCH#configure terminal

L2SWITCH(config)#vlan 2

L2SWITCH(config-vlan)#fixed 1-5

L2SWITCH(config-vlan)#untagged 1-3

L2SWITCH(config)#vlan range 10-14