Tripp Lite NGI-S04C2, Owner'S Manual

Page: 102 / 138

102
Trunk port:
Allows the user to configure up to 5 VLAN’s maximum on the interface and always
tagged where its PVID is 1 (the system configures them automatically). The port should
be connected to another switch.
Default Settings
All ports join in the VLAN 1.
6.6.2.1. CLI Configuration
Node Command Description
enable show vlan VLANID This command displays the VLAN
configurations.
configure vlan <1~4094> This command enables a VLAN and enters the
VLAN node.
configure no vlan <1~4094> This command deletes a VLAN.
vlan show This command displays the current VLAN
configurations.
vlan name STRING This command assigns a name for the specific
VLAN.
The VLAN name should be the combination of
the digit or the alphabet or hyphens (-) or
underscores (_).
The maximum length of the name is 16
characters.
vlan no name This command configures the vlan name to
default.
Note: The default vlan name is
“VLAN”+vlan_ID, VLAN1, VLAN2,…
vlan add PORTLISTS This command add a port or a range of ports to
the vlan.
vlan fixed PORTLISTS This command assigns ports for permanent
member of the vlan.
vlan no fixed PORTLISTS This command removes all fixed member from
the vlan.
vlan tagged PORTLISTS This command assigns ports for tagged
member of the VLAN group. The ports should
be one/some of the permanent members of the
vlan.
vlan no tagged PORTLISTS This command removes all tagged member
from the vlan.
vlan untagged PORTLISTS This command assigns ports for untagged
member of the VLAN group. The ports should
be one/some of the permanent members of the
vlan.
vlan no untagged
PORTLISTS
This command removes all untagged member
from the vlan.