manualshive.com logo in svg

Tripp Lite NetDirector B024-H4U08, Owner'S Manual

Share
Download
Tripp Lite NetDirector B024-H4U08 Owner'S Manual Download Page 8

8

5. System Requirements

No. Component

Description

3

Firmware 

Upgrade 

Recovery Switch

During normal operation and while performing a firmware upgrade, this switch should be 

in the NORMAL position. If a firmware upgrade operation does not complete successfully, 

this switch is used to perform a firmware upgrade recovery. See section 

13.6 Firmware 

Upgrade Recovery

 for details.

4

Audio Jack

The cables from your main speakers plug in here.

Note:

 The speakers plugged into the front-panel audio jack have priority over those in the rear panel.

5

Firmware 

Upgrade Port

The firmware upgrade cable that transfers the firmware upgrade data from the 

administrator’s computer to the KVM switch connects to this RJ11 connector.

6

USB 3.1 Gen 1 

Peripheral Hub 

Section

USB 3.1 peripherals (printers, scanners, etc.) plug into this port (this may require an extra 

power adapter).

Note: 

The USB 3.1 hub cannot be accessed through the switch by computers on the second level of a 

cascaded installation.

7

Reset Button

Pressing this switch performs a system reset. When the system resets, the switch beeps 

and the port LEDs flash in succession until the reset is complete. After the reset is complete, 

you can login again.

Note: 

This switch is recessed and must be pushed with a small object, such as the end of a paper clip 

or a ballpoint pen.

8

Power LED

Lights to indicate that the switch is powered up and ready to operate.

Summary of Contents for NetDirector B024-H4U08

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands