23
8. Basic Operation
8.4 Powering Off and Restarting the KVM
If it becomes necessary to power off a KVM switch, do the following before restarting it:
1
Unplug the KVM from its power source.
2
Shut down all computers that are attached to it.
Note:
Unplug the power cords of any computers that have the Keyboard Power On function. Otherwise, the KVM will continue to
receive power from the computers.
3
Wait 10 seconds, then plug the KVM back into its power source.
4
Power on the computers.
Note:
If there are stations cascaded down from the primary KVM, all the cascaded stations and the computers attached to them must
be shut down as well.
