50
12. RS-232 Operation
Switch Port Command
The available formula for the Switch Port command is as follows:
C C [Enter]
For example, to switch to port 2, type the following:
sw i02 [Enter]
Note:
The Control command can be skipped and the default value will be used.
12.4.7 Hotkey Setting
The Hotkey Setting command allows you to change the hotkey used to invoke the HSM (Hotkey Setting Mode).
The default hotkey is [Num Lock] + [-].
Use the
Formula
→ to set
Parameters
→ to create a
Command
.
Formula
C C [Enter]
Parameters
Command
Description
hotkey
Hotkey Setting command
Control
Description
num
Change the HSM invoke key to:
[Num Lock] + [-] (Default)
f12
Change the HSM invoke key to:
[Ctrl] + [F12]
Enter
Description
Enter
Enter and send out command
Hotkey Setting Commands
The available formulas for Hotkey Setting commands are as follows:
1
C C [Enter]
For example, to change the HSM invoke key to [Num Lock] + [-], type the following:
hotkey num [Enter]
2
C C [Enter]
For example, to change the HSM invoke key to [Ctrl] + [F12], type the following:
hotkey f12 [Enter]
