TX7410 Operation Manual
31
Figure 4-24 Loading file
3) ERASE
Perform the following steps to erase file:
a) Select “ERASE” at file operation page through
【
▲
】
or
【
▼
】
key, as shown in
Figure4-25.
b) Press
【
▲
】
or
【
▼
】
key to select erasing file No. Displayed “Y” means the file has existed,
and “N” means the file doesn’t exist.
c) Press
【
ENTER
】
key to perform the erasing operation, and hint “SURE” to ensure the
operation, press
【
ENTER
】
key to erase the file, otherwise, press
【
ERC
】
key to give up the
operation.
d) Press
【
ESC
】
to exit.
Figure 4-25 Erasing file
4.2.16 System function setup
System setup includes the following items:
BUS:
BUS mode
ADDR:
GPIB address;
BAUD:
RS232C communication baud rate;
DELIM:
ending symbol;
FETCH:
fetch mode;
TRGEG:
HANDLER interface’s trigger edge;
HD:
HANLDER interface’s signal hold;
ALARM:
comparator alarm;
SOUND:
alarm sound;
KBEEP:
key beep on/off;
KLOCK:
key lock on/off;
SAVE:
saving system setups
Perform the following steps to enter system setup page:
1.
At test status, press SHIFT key, and “SHIFT” at left corner is on.
2.
Press SYSTEM key to enter system setup page, as shown in 4-26.
