Trinity Highway QuadGuard Elite M10, Product Description Assembly Manual

Page: 29 / 60

TrinityHighway.com 28 Revision C September 2021
3) Anchor the Backup and Monorail
See Figure 17 (showing Backup Assembly) and Figure 19 (showing Monorail deployment).
Also refer to the drawing package and the approved anchoring instructions (p. 20).
Warning:
Location of the system as determined by the proper highway authority
is critical and dependent on the type of Transition Panel used. Consult project
plans supplied by the applicable highway authority with the system for details.
Step 1. Tension Strut Backup Assembly (Figure 17)
Locate the Backup and Monorail on the pad with the side of the Monorail on the
construction line (Figure 19). Verify that applicable Transition Panels fit properly before
anchoring the Backup. Drill 5 3/4” [146 mm] deep anchor holes in the pad using the Backup
as a template. Do not drill through pad. Anchor the Backup to the concrete pad using
approved adhesive kits (p. 20).
Figure 17
Anchoring Tension Strut Backup to Foundation
TENSION STRUT BACKUP
APPROVED ADHESIVE
WITH 3/4” x 7”
ANCHOR ASSEMBLY