Trinity Highway QuadGuard Elite M10 Wide, Product Description Assembly Manual

Page: 32 / 68

TrinityHighway.com 31 Revision A August 2020
12) Attach Nose Cylinder
Attach the Nose Cylinder using two 5/8” bolts rods through the Nose Cylinder Plate, Nose
Cylinder, and Diaphragm (Figure 30). Secure each 5/8” hex bolt with flat washers, lock
washers, and hex nuts. Tighten all fasteners.
13) Attach Hinge Plates to Diaphragm
Orient Hinge Plate with holes rearward and hinges toward the front. Insert 5/8X4” hex bolts
through all hinges. Secure each bolt with 5/8” lock washer and hex nut (Figure 31). (Typical
three places per side on all Diaphragms) The First Diaphragm has additional Cylinder
Segments fastened with 5/8” heavy hex nuts, flat washers and 5/8X5” hex bolts (Figure 32).
See pages 48 and 49 for additional information.
Figure 30
Attach Nose Cylinder to First Diaphragm
QEN CYLINDER ASSEMBLY
5/8X3 1/2 HEX BOLT
5/8X9 HEX BOLT
5/8 ASSEMBLY FASTENERS
5/8X1 3/4 WASHER
DIAPHRAGM EXTENSION
Figure 32 - Hinge Plate 1
st
Diaphragm
Figure 31 - Hinge Plate Diaphragms 2-6
5/8X5 G5 HEX BOLT
SEE FIGURE 19
CYLINDER SEGMENT
5/8X1 3/4
WASHER
5/8 HEX NUT
5/8 HEX NUT
5/8 LOCK WASHER
5/8X4 HEX BOLT
HINGE PLATE