Trinabess PowerCube 2.0 DC, Installation Manual

Page: 34 / 45

34
System Setting
– Setting Smart Meter address
Smart Meter Address Setting:
Usually during the first initialization , the smart meter address
need to be changed.
1.
At the standard interface, long press the “OK” button for 3
seconds to
enter the setting menu .
2. Input the
password “1111”
3. Choose parameters by
pressing “ ▲ ”, “ ▼ ” buttons. Go into
“
ADR
” which refers to smart meter address
4. Check the address column is the same as that on smart
meter label
5. Press
“ ▲ ” or “ ▼ ” to change the 1
st
digit, press “OK” to
switch to next digit, after inputting the correct address,
press “OK”