Introduction
This manual provides the necessary information for the proper
installation and use of Tri
Mark
’s
e-
ASK
system. The
e-
ASK
System
comes with the following components:
e-
FOB
:
Keyless entry RF FOB transmitter with Passive keyless
LF PKS (Passive Keyless Start) ability
e-
ASK
I/O Module:
The input/output processor with low
frequency (LF) and RF transceiver capabilities
Antennas:
LF interior antennas for FOB detection
Grab Handle with Keypad:
A five button chrome handle. It
allows for locking, unlocking and compartment access functions
via a CAN network
This new generation of Tri
Mark
’s
e-
ASK
not only maintains its previous
advantages for controlling door and accessory control, it also adds
value to the Original Equipment Manufacturer (OEM) and customer by
incorporating remote keyless entry and keyless start into a single
package.
The FOBs have typical lock/unlock buttons that can be used up to 50
meters depending on architecture and location. For security reason, RF
signals are encrypted using randomly generated numbers. This is what
allows the system to start by pressing a button. The system uses the
LF/RF messaging to ensure an authorized FOB is within range inside
the vehicle. A combination of LF messages and RF responses delivers
low power consumption for long battery life.
General Component Overview:
e-
CONTROLLER
Enables distributed functionality, such
as multiple door control and ignition
immobilization, via vehicle RV-C
communication
CAN network functionality with error
handling
Fault displaying LEDs
LF transceiver (FCC/IC compliant)
RF transceiver (FCC/IC compliant)
Programming port
Selectable visual/audible dip switches
4
Summary of Contents for 500-1300 e-ASK
