Feedback:
If you activate the alarm from keypad, the system will send a
single pulse to the headlights.
If you activate the alarm from the FOB, the system will send a
single pulse to the headlights and horn/siren.
If you fail to activate the alarm the siren will sound 3 times.
Disarming/Cancelling the Alarm:
Any of these conditions will cancel an active alarm:
The vehicle is put into gear
An unlock command of any entry door
The alarm timer expires
Tripping the Alarm:
After arming the alarm, if the security input (CJ1) or any of the door ajar
inputs are tripped, the alarm will activate. When active, the siren will go
off and the headlights will flash for one minute.
Auto Locking
Auto Lock / Unlock
The parking brake is monitored to utilize this auto locking feature:
Whenever the vehicle parking brake released, a timer is started.
Seven seconds later an Entry Lock and latch compartment door is
performed.
Whenever the parking brake goes from “set” to “released,” after
an Auto Lock completes, compartment doors cannot be opened
until the parking brake is set again and an unlatch function is
complete.
Parking Brake
Description
Set Active
The parking brake is active and the vehicle
cannot move. The vehicle is considered “not in
use”.
Released Float
The vehicle will move if no other brakes are
applied. The vehicle is considered “in use”.
This is usually caused by putting the vehicle
into gear.
7
Summary of Contents for 500-1300 e-ASK
