Trilithic 120 DSP Operation Manuals Download Page 94

Page: 94 / 288

www.trilithic.com

Page II-38

120 DSP Operation Manual

Basic Signal Level Meter

120

The

Channel Plan

screen will be displayed as shown

in the image to the right. This screen allows you to:

•  Open, create, save and delete channel plans
•  Add and remove channels
•  Edit channel details
•

Save preset channel configurations

Channel Plan Management

Select the

Channel Plan

button as shown in the

image to the right to manage channel plans on the

120 DSP.

From within the

Channel Plan

screen, use the arrow buttons on the keypad to navigate

through the list of channels.

These parameters can be set directly from your instrument

or using ViewPoint Express. For instructions regarding

setup using ViewPoint Express, please refer to the ViewPoint

Express Operation Manual.

Channel Plans and Limit Sets created/modified on the 120

DSP can only be used in the Troubleshooting menu. Autotests

require ViewPoint Express Channel Plans and Limit Sets.

Summary of Contents for 120 DSP

































































































































































































































































































Search results

Summary of Contents for 120 DSP

Reviews:

Brands by name

Popular brands

Trilithic 120 DSP, Operation Manuals

Search results

Summary of Contents for 120 DSP

Reviews:

Brands by name

Popular brands