manualshive.com logo in svg

Trilithic 120 DSP, Operation Manuals

Share
Download
Trilithic 120 DSP Operation Manuals Download Page 53

www.trilithic.com

Page I-37

120 DSP Operation Manual

Basic Signal Level Meter

120

Perform the following steps to connect using the Ethernet connection:

1.  Connect an Ethernet cable to the Ethernet 

Port of the 120 DSP.

2.  Select the 

Ethernet

 connection button from 

the 

Network Manager

 window as shown in 

the image to the right. 

Ethernet Connection

3.  If the 

Prompt User

 option is set to 

Yes

 from within the 

Ethernet Settings

 

option of the 

Setup

 menu, the 

Ethernet Settings

 window will appear 

as shown in the image to the right. 

Adjust the Ethernet settings as desired 

and then select the 

Login

 button.

If the Prompt User option is set to No from within the Ethernet 

Settings option of the Setup Menu, the Ethernet Settings 

window will not appear. If so, proceed to Step 4.

Summary of Contents for 120 DSP

































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands