Trilithic 120 DSP Operation Manuals Download Page 269

Page: 269 / 288

www.trilithic.com

Page IV-101

120 DSP Operation Manual

Basic Signal Level Meter

120

Ping Mode

When the

Ping

mode is selected, the following

measurement results are displayed as shown in

the image to the right:

• Minimum Time

- This is the minimum

time required to send/receive a single test

packet.

• Average Time

- This is the average time

required to send/receive all test packets.

• Maximum Time

- This is the maximum

time required to send/receive a single test

packet.

• Sent

- This is the number of packets sent by the 120 DSP to the destination IP

address.

• Received

- This is the number of packets received by the 120 DSP from the

destination IP address.

• LPR

- This is the lost packet ratio. This measurement is displayed in the bar graph

and as a numeric value. The LPR is calculated as the percentage of packets

received to those which were sent (LPR = {Received Packets / Sent Packets} *

100%), for example:

•  50 sent packets
•  25 received packets
•  LPR = {25 / 50} * 100%

{0.50} * 100%

50%

Summary of Contents for 120 DSP

































































































































































































































































































Search results

Summary of Contents for 120 DSP

Reviews:

Brands by name

Popular brands

Trilithic 120 DSP, Operation Manuals

Search results

Summary of Contents for 120 DSP

Reviews:

Brands by name

Popular brands