Trilithic 120 DSP Operation Manuals Download Page 235

Page: 235 / 288

www.trilithic.com

Page IV-67

120 DSP Operation Manual

Basic Signal Level Meter

120

Pass/Fail Measurement Indicators

When a limit set has been opened, the return spectrum will be tested against the high limit

measurement threshold for the return spectrum ingress.
A Pass/Fail status will be displayed at the top of the screen. The pass/fail status of the

return spectrum ingress will be indicated using the following icons:

This icon indicates that this measurement

was skipped. This only applies to

measurements that have been removed

from the currently selected limit set.
This icon indicates that this measurement

is within the high limit measurement

thresholds for the return spectrum

Ingress

measurement.
This icon indicates that the measurement

has failed the high limit measurement

threshold for the return spectrum

Ingress

measurement.

Summary of Contents for 120 DSP

































































































































































































































































































Search results

Summary of Contents for 120 DSP

Reviews:

Brands by name

Popular brands

Trilithic 120 DSP, Operation Manuals

Search results

Summary of Contents for 120 DSP

Reviews:

Brands by name

Popular brands