CHARGING
1. The Pon
‐
e should need to charge for no more than 5 hours before its first use, or when fully
discharged.
2. To charge the batteries, first connect the charging unit to the plug located on the backside of the
bag assembly near the top. Then plug the charging unit into a normal 110V socket.
3. When the batteries are charging, the light on the charger will be red. Once the batteries are fully
charged, the light on the charger will turn green. Note that when the Pon
‐
e is unplugged from the
charger, the light on the charger will be green.
4. The VRLB Lead
‐
Acid batteries included in the Pon
‐
e vehicle should last for 200 Full Cycles. A full
cycle is a full discharge and recharge.
5 Good charging practice would be to plug the batteries into the charger at every opportunity and
5. Good charging practice would be to plug the batteries into the charger at every opportunity and
keep the batteries topped off.
6. If the Pon
‐
e will be unused for an extended period of time, it should be topped off once a month.
7. Always unplug the charger by the plug (arrow) and not the wire.
8. It takes 0.3 KW/H to fully charge the discharged batteries.
PARKING
1. Use the locking parking brake feature found on the brake lever of the Pon
‐
e. Pull the brake lever
toward the handle to engage the brakes. Push the pin down to secure the brake lever in the
locked position. Release the brake lever while pushing the locking pin down so that the tension of
the brake lever holds the locking pin in place. To release the locking pin, squeeze the brake lever
toward the handle again and the locking pin will spring out of the locked position.
Trikke Tribred Pon
‐
e
Owner's
Manual
V1
10/1/08
27