From the front fork/motor assembly, be sure the motor cable is behind the front fork and fastened to
the upper arm of the fork with a zip
‐
tie. Allowing a little slack, use one of the zip
‐
ties provided to tie
the motor cable to the outside edge of the cambering mechanism. Cut the excess zip
‐
tie material.
Step
4:
Check
the
front
fork/motor
assembly
cable
alignment
Turn the vehicle right side up and look down the front post. Adjust the stem post by aligning the
front wheel axle with the handlebar (You may need to loosen the stem bolts to adjust the handlebar
alignment)
Step
5:
Check
the
handlebar
alignment
alignment).
Now all you need to do is use the 5mm Hex wrench to lock the handlebar in place.
Trikke Tribred Pon
‐
e
Owner's
Manual
V1
10/1/08
10