Step
1:
Unfolding
the
Legs
At the front of each leg there is a folding
joint near the cambering mechanism.
Each of the two joints has a spring
‐
loaded
bolt
action
quick release
loaded
bolt
action
quick
‐
release
mechanism with a notch to allow the
bolt to be held in the open position.
The same procedure also applies to
collapsing the vehicle. When the Pon
‐
e
is new, sometimes the joints are tight.
This is normal, and they will loosen up
after some use. If tightness continues,
us some spray oil like WD
‐
40 to lubricate
the joints.
The vehicle should be in its unfolded
standing position in order to attach the
handlebars.
Trikke Tribred Pon
‐
e
Owner's
Manual
V1
10/1/08
7