Spin each wheel. If the disc wobbles when rotated, mark the extreme point of the disc
that is off and correct it by using your fingers to bend the disc in or out. Repeat this
correction until the disc is “true” or no longer shows any wobble when you spin it. (this
is a common procedure because bicycle discs are very thin and may get deformed
easily)
easily).
4
5
After trueing the discs in step 4, you might need to make minor adjustments to the
inner and outer pads. When adjustments are final, use a 2.5mm allen wrench to lock
h i
d dj
b
i h
i
i l ki
b l (
ll b l
h
id
the inner pad adjustment screw by tightening its locking bolt ( a small bolt at the side
of the inner pad body)
6
Trikke Tribred Pon
‐
e
Owner's
Manual
V1
10/1/08
15